LIST OF PERMITTING/APPROVING DOCUMENTS
Environmental product declarations
“Environmental Product Declaration (EPD) – Steel fiber: waved(undulated), with hooked ends, with flattened ends with the Nominal Tensile Strength from 1150 to 2150 N/mm2, length 35÷60 mm, diameter 0.7÷1.20 mm”
Issued by:
Date of issue:
Valid until:
Environmental Product Declaration (EPD) – reinforcing stabilized three- and seven-wire strands with and without dents with a nominal tensile strength of 1670÷1860 N/mm2 with a diameter of 6.5÷15.7 mm (PC-strand)
Issued by:
Date of issue:
Valid until:
ISO 9001:2015
Certificate of conformity of the quality management system with the requirements of ISO 9001:2015
Issued by:
Bureau Veritas Holding SAS
Date of issue:
05.12.2025
Valid until:
CERTIFICATES AND CONFORMITY CERTIFICATES FOR STEEL WIRE
1397-СPR-0723
Certsficate of Conformity of the Factory Production Control welding consumables. wire electrodes 3Si1 and 4Si1 according EN 14341-2020"
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2022
Valid until:
« Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly.»
CERTIFICATES AND CONFORMITY CERTIFICATES FOR STEEL WIRE ROPES
Certificate of Conformity 2026
Issued by:
Date of issue:
Valid until:
Declaration of conformity of steel ropes TR
Issued by:
Date of issue:
Valid until:
CONFORMITY CERTIFICATES FOR STEEL FIBRE
1397-CPR-0746
EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -2150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
09.03.2023
Valid until:
BSI Certificate CPR 766627
Certificate of performance consistency of steel fiber with bent ends 50-1.0 mm and 60-1.0 mm with a temporary breaking strength of 1150 N/mm2 and 1550 N/mm2 for structural reinforcement of concrete and mortar, respectively EN 14889-1: 2006
Issued by:
Date of issue:
Valid until:
1397-CPR-0718
"EC - certificate of constancy of performance properties of steel fiber with bent ends 35-0.75 mm with a ultimate tensile strength of 1650 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006"
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2022
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0812
EC - certificate of constancy of performance properties of steel fiber with bent ends 35-0.75 mm with a ultimate tensile strength of 2 380 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
1397-CPR-0717
"EC - certificate of constancy of performance properties of steel fiber with bent ends 35-0.75 mm with a ultimate tensile strength of 1250 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2022
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0710
EC - certificate of constancy of performance of steel fiber with flattened ends 50-1.0 mm with a ultimate tensile strength of 1150 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
3.01.2022
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0768
EC - certificate of constancy of performance for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1650 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0769
EC - certificate of constancy of performance for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0347
EC - certificate of constancy of performance for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0459
EC - certificate of constancy of performance for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0412
EC - certificate of constancy of performance for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0460
EC - certificate of constancy of performance for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0676
EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
1397-CPR-0770
EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1600 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
29.12.2023
Valid until:
Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly
DECLARATIONS OF PERFORMANCE FOR MANUFACTURED TYPES OF CERTIFIED FIBRES ACCORDING TO EN 14889-1:2006
101
Declaration of performance No. 101 for hooked ends steel fibres: 60-0,90 mm with Tensile strength -2150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
107
Declaration of performance No. 107 for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
104
Declaration of performance No. 104 for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1650 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
105
Declaration of performance No. 105 for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
102
Declaration of performance No. 102 for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
106
Declaration of performance No. 106 for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
103
Declaration of performance No. 103 for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
108
Declaration of performance No. 108 for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
109
Declaration of performance No. 109 for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1600 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
110
Declaration of performance No. 110 for shape–deformed (with flattened ends) steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
111
Declaration of performance No. 111 for hooked ends steel fibres 35-0,75 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
112
Declaration of performance No. 112 for hooked ends steel fibres 35-0,75 mm with Tensile strength -1650 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
113
Declaration of performance No. 113 for hooked ends steel fibres НЕ 50/1,0 1550Н/мм2, НЕ 60/1,0 1550Н/мм2 and flattened ends steel fibres FE 50/1,0 1150Н/мм2 for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
114
Declaration No. 114 on the performance of 35-0.75 mm bent-end steel fibers with a temporary tensile strength of 2380 N/mm² for structural reinforcement of concrete and mortar in accordance with EN 14889-1:2006
Issued by:
Date of issue:
Valid until:
CERTIFICATES OF CONSTANCY OF PERFORMANCE FOR REINFORCEMENT PC STRANDS
№20-CPR-328-(C-2-2018)
Issued by:
Date of issue:
Valid until:
KOMO Product certificate K-0228103-1
Product certificate: Prestressing steel 7-wire strand 9.3mm, 12.5mm, voorspanstreng NEN 3868:2001, FeP 1860-9.3-7S (Y1860S7-9.3-R1-F2-C1), FeP 1860-12.5-7S (Y1860S7-12.5-R1-F2-C1)
Issued by:
Date of issue:
Valid until:
АТ 021-01/015-2026
Technical Approval No. 021-01/015-2026 developed by AXA CERT and Technical Opinion No. 218972 issued by the Ministry of Development, Public Works and Administration of Romania (Permanent Technical Council for Construction) for Prestressed Concrete Steel Strand Product (Ø 6.5–15.7 mm)"
Issued by:
AXA CERT / MINISTRY OF DEVELOPMENT
Date of issue:
Valid until:
TZÚS CERTIFICATE No. 204/C5/2025/070-066460
Product certificate: 7-wire strands with low relaxation for prestressing reinforcement, type: Y1860S7, diameters from 9,3 mm to 15,7 mm
Issued by:
Date of issue:
Valid until:
SPSC-9695
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-15,7-R1-F1-C1
Issued by:
Date of issue:
09.08.2024
Valid until:
09.08.2027
SPSC-9694
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-15,2-R1-F1-C1
Issued by:
Date of issue:
09.08.2024
Valid until:
09.08.2027
KIWA Certificate No. 13985-03
Certificate of constancy of operational properties of strand SS 212551:2013, SS 212553:2013, prEN 10138-1:2006, prEN 10138-3:2006, FprEN 10138-1:2009, FprEN 10138-3:2009: Y1860 S7-9.30-15.2 (smooth strand)-R1-F1-С1 and Y1860 S7-9,3-12,9 (indented strand)-R1-F1-С1.
Issued by:
Date of issue:
Valid until:
License No. 111840 to mark a commodity with the Standards Mark
Certificate from the Standards Institute of Israel (SII). License No. 111840 to mark a commodity with the Standards Mark in conformity with the requirements of the Israel Standard No. 1735 Part 4 Edition November 2022. Strands with a diameter of 9.5, 12.7, 15.2, 15.7 mm.
Issued by:
Date of issue:
27.02.23
Valid until:
R-2.1.5-22-17818
Certificate of performance consistency for ÖNORM B 4758-Y 1770 S7-R1-F1-C1 and ÖNORM B 4758-Y 1860 S7-R1-F1-C1 reinforcing strands with diameters 9.3mm - 15.7mm
Issued by:
Date of issue:
21.10.22
Valid until:
KIWA Certificate No. 11196-05
Certificate of constancy of operational properties of strand SFS 1265-1:2014, SFS 1265-3:2014-Y1860 S7-9.30-15.20 (smooth)-R1-F1-С1; Y1860 S7-9.30-12.9 (indented)-R1-F1-С1 and Y1860 S3-6.5 (indented)-R1
Issued by:
Date of issue:
Valid until:
SPSC-9512
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-9,3-R1-F1-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
SPSC-9513
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-9,3-I-R1-F1-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
SPSC-9517
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-R1-F1-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
SPSC-9518
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-I-R1-F1-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
№020-UWB-3055/W
National Certificate of constancy of performance for prestressing steel strands produced by PJSC «STALKANAT» made with smooth wires
Issued by:
ITB, Польша, г. Варшава
Date of issue:
05-04-2024
Valid until:
04-03-2029
SPSC-9573
Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-I-R1-F2-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
№ 20-CPR-322-(C-8-2018)
Certificate of constancy of performance for prestressing steel strand of 1860 MPа nominal tensile strength with diameter 9,3 mm, plain and indented surface
Issued by:
EMI, Венгрия
Date of issue:
27.06.2022
Valid until:
№ 20-CPR-328-(C-8-2018)
Certificate of constancy of performance of steel reinforcing strands 1860 MPa with a diameter of 12.5 mm smooth and indented, 15.2 mm smooth, 15.7 mm smooth
Issued by:
EMI, Венгрия
Date of issue:
Valid until:
SPSC-9600
SPSC-9600 Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,50-R1-F2-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
SPSC-9630
SPSC-9630 Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S3-6,9-I-R1-F1-C1
Issued by:
SPSC, Vilnius, Lithuania
Date of issue:
03.01.2025
Valid until:
03.01.2028
DECLARATIONS OF PERFORMANCE FOR CERTIFIED TYPES OF PRESTRESSING STEEL STRANDS
1
Declaration of performance No. 1 for prestressing steel strand with diameter 9,3 mm (plain) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
2
Declaration of performance No. 2 for prestressing steel strand with diameter 9,3 mm (indented) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
3
Declaration of performance No. 3 for prestressing steel strand with diameter 12,5 mm (plain) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
4
Declaration of performance No. 4 for prestressing steel strand with diameter 12,5 mm (indented) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
5
Declaration of performance No. 5 for prestressing steel strand with diameter 12,5 mm (plain with fatigue class F2) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
6
Declaration of performance No. 6 for prestressing steel strand with diameter 12,5 mm (indented with fatigue class F2) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
7
Declaration of performance No. 7 for prestressing steel strand with diameter 12,5 mm (plain) (the Republic of Poland)
Issued by:
Date of issue:
Valid until:
8
Declaration of performance No. 8 for prestressing steel strand with diameter 15,2 IBDIM-KOT-2026/1189 wydanie 1 (plain) (the Republic of Poland)
Issued by:
Date of issue:
Valid until:
9
Declaration of performance No. 9 for prestressing steel strand with diameter 9,3 mm (plain and indented) (Hungary)
Issued by:
Date of issue:
Valid until:
10
Declaration of performance No. 10 for prestressing steel strand with diameter 12,5 mm (plain and indented) (Hungary)
Issued by:
Date of issue:
Valid until:
11
Declaration of performance No. 10 for prestressing steel strand with diameters’ range: 6,9- 15,2 mm, the tensile strength ranges:1770 N/mm2, 1860 N/mm2 ( with plain and indented wires) (Romania)
Issued by:
Date of issue:
Valid until:
12
Declaration of performance No. 12 for prestressing steel strand with diameter 15,7 mm IBDIM-KOT-2026/1189 wydanie 1 (plain) (the Republic of Poland)
Issued by:
Date of issue:
Valid until:
13
Declaration of performance No. 13 for prestressing steel strand with diameter 6,9 mm (indented) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
14
Declaration of performance No. 14 for prestressing steel strand with diameter 15,2 mm (smooth) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
15
Declaration of performance No. 15 for prestressing steel strand with diameter 15,7 mm (smooth) (the Republic of Lithuania)
Issued by:
Date of issue:
Valid until:
16
Declaration of performance No. 16 for prestressing steel strand with diameter 15,2 ITB-KOT-2018/0637 wydanie 3 (plain) (the Republic of Poland)
Issued by:
Date of issue:
Valid until:
17
Declaration of performance No. 17 for prestressing steel strand with diameter 15,7 ITB-KOT-2018/0637 wydanie 3 (plain) (the Republic of Poland)
Issued by:
Date of issue:
Valid until:
18
Declaration No. 18 on the Performance Characteristics of 15.2-mm-Diameter Reinforcing Bars (plain) (Hungary)
Issued by:
Date of issue:
Valid until:
19
Declaration No. 19 on the Performance Characteristics of 15.7-mm-Diameter Reinforcing Bars (plain) (Hungary)
Issued by:
Date of issue:
Valid until:
20
Declaration No. 20 on the Performance Characteristics of Reinforcing Bars (Czech Republic)
Issued by:
Date of issue:
Valid until:
Certificate of CPL
DECLARATION OF PERFORMANCE For Welding wire
50
DECLARATION OF PERFORMANCE For Welding wire EN ISO 14341-A-G 3Si1
Issued by:
Date of issue:
Valid until:
51
DECLARATION OF PERFORMANCE For Welding wire EN ISO 14341-A-G 4Si1
Issued by:
Date of issue:
Valid until:
APPROVAL DOCUMENTS FOR WIRE, ROPES, STRAPS
1181-26/23
A certificate that the products - cold-drawn wire made of non-alloy steel, cold-drawn wire made of alloy steel, steel ropes, rope slings are not subject to mandatory certification and assessment of compliance with Technical Regulations on the territory of Ukraine.
Issued by:
ГП «Одессастандартметрология», г. Одесса
Date of issue:
11.02.26
Valid until:
11.08.26