LOW CARBON STEEL WIRE FOR GENERAL PURPOSE
  • Standard: GOST 3282-74
  • Diameter: from 0,30 mm up to 6,0 mm
  • Application: for production of nails, binding, enclosures, mesh and other purposes.
Instructions
Recommendations
Packaging
Calculator
Contacts

GOST 3282-74

GOST 3282-74

Type of treatment:

  • without heat treatment;
  • heat treated.

Type of coating:

  • without coating;
  • galvanized – «1-st class».
MECHANICAL PROPERTIES
Diameter, mmTensile strength, N/mm2
Without heat treatment without coating and galvanizedHeat treated without coating
1 group2 group
0,3 ≤ d ≤ 0,45690 – 1370690 – 1370
0,45 < d ≤ 0,60690 – 1270690 – 1180
0,60 < d ≤ 1,00690 – 1270690 – 1180290 – 490
1,00 < d ≤ 1,20590 – 1270690 – 1180
1,20 < d ≤ 2,50590 – 1180690 – 980
2,50 < d ≤ 3,20540 – 1080640 – 930
3,20 < d ≤ 3,60440 – 930640 – 930
3,60 < d ≤ 4,50440 – 930590 – 880
4,50 < d ≤ 6,00390 – 830490 – 780
MASS OF ZINC COATING
Diameter, mmMass of coating, g/m2, not less
0,40 < d ≤ 0,5020
0,50 < d ≤ 0,8030
0,80 < d ≤ 1,0035
1,00 < d ≤ 1,2040
1,20 < d ≤ 2,0050
2,00 < d ≤ 2,5060
2,50 < d ≤ 3,6070
3,60 < d ≤ 5,0080

RECOMMENDATIONS

Before use the wire must be stored in dry, ventilated rooms with low humidity and without sudden changes in temperature to prevent rusting due to moisture condensation.

Before unwinding the wire in the coils, you must first release the coil from the bindings. This must be done carefully, especially when removing the end of the knitting wire threaded through a coil to prevent pulling out and entangling the turns of wire.

Then release the upper end of the wire threaded through the upper turns around the entire circumference of the coil. Before installing and threading the wire into the machine, make sure that the wire is not interwoven with adjacent turns. To do this, it is necessary to lift the end and several turns of wire and then put one turn back into the coil, making sure that there is no “overlapping” of the turns. This will prevent entanglement and wire breakage during the unwinding process.

Before unwinding coils of Z-2 or coils of another type, it is necessary to assemble the coils into a special detachable reel or other unwinding device, tightly fix the cheeks of the coil, ensuring maximum pressure against the wire to prevent “tightening” of the wire between the coils and the cheek of the unwinding device, which can lead to a break wire during unwinding and only after that release the coil from packing metal tapes. After that, tighten the coil or other device again for maximum clamping of the wire coil. Find and free the end of the wire, making sure that there is no “overlap” of the wire through adjacent turns. This will eliminate wire breaks during unwinding.

Spools BS-60; Spools BP-60S

Not lubricated. Each spool is wrapped with waxed paper, which is attached with twine; packed spools are stacked on a wooden pallet measuring (1070x815) mm. When packing the spools, the pallet is pre-lined with plastic wrap, a sheet of cardboard and a cardboard layer is laid between each row of spools. The spools laid out on a pallet are tied with a metal tape (0.5x16) mm, covered with a plastic film on top and wrapped with “stretch” film.

  • Type of winding:Spools BS-60
  • Dimensions, mm, d*D*h:118х255х152
  • Weight kg:16 - 30
  • Diameter range, mm:0,3 – 0,55
  • Type of winding:Spools BP-60S
  • Dimensions, mm, d*D*h:118х255х152
  • Weight kg:16 - 25
  • Diameter range, mm:0,3 – 0,55
Моток

The coils are tied with the same wire or heat-treated wire Ø 0.8 mm. Not lubricated. The coils are stacked in wooden boxes with a size of (1100 * 880 * 715) mm for a package of 1000 kg and a size of (1100 * 880 * 550) mm for a package of 500 kg. Boxes are pre-lined with plastic wrap. At the request of the consumer, each coil of wire must be packed in waxed paper and each row of coils is laid with corrugated cardboard.

  • Type of winding:Coil
  • Dimensions, mm, d*D*h:140х240х70
  • Weight kg:7 – 14
  • Diameter range, mm:0,3 – 0,55
Coil

Each coill is tied with a heat-treated wire of Ø1.8 mm in at least four places evenly spaced around the coil. Not lubricated. Each coil is packed in a polypropylene cloth, packaged (4 - 5 coils) with a 0.5 x 16 mm metal steel tape in four places evenly spaced around the bag circumference. The tapes are fixed with heat-treated wire Ø1.8 mm around the circumference of the middle of the package.

  • Type of winding:Coil
  • Dimensions, mm, d*D*h:220х400х160
  • Weight kg:60 - 100
  • Diameter range, mm:0,6 – 1,0
  • Type of winding:Coil
  • Dimensions, mm, d*D*h:220х400х160
  • Weight kg:60 - 100
  • Diameter range, mm:1,0 – 1,3
Coil

Each coil is tied with a heat-treated wire of Ø1.8 mm in at least four places evenly spaced around the coil. It is not lubricated or packaged. It is packaged (in 4 - 5 coils) with a metal tape of 0.5x16 mm in four places evenly spaced around the circumference of the bag. The tapes are fixed with heat-treated wire Ø1.8 mm around the circumference of the middle of the package. At the request of the consumer, each coil is packed in a polypropylene fabric.

  • Type of winding:Coil
  • Dimensions, mm, d*D*h:400х650х200
  • Weight kg:120 - 150
  • Diameter range, mm:1,4 – 6,0
Coil Z2

Each coil is tied with a metal steel tape (0.5x16) mm in at least six places evenly spaced around the coil. It is not lubricated. The coils are packed in a polypropylene cloth and installed on wooden pallets of 2 coils (fixed to the pallet with packing tape (0.5x16) mm) or 3 windings (fixed to the pallet with metal tape (0.8x30) mm) in four places evenly spaced around the circumference. Pallet size is (730x730) mm. The pallet is lined with wrapping paper (cardboard). When packing 3 coils on a pallet, a wooden cross is installed inside the coils. At the request of the consumer, the coils can be packed in waxed paper and polypropylene fabric.

  • Type of winding:Coil Z2
  • Dimensions, mm, d*D*h:356x700x300
  • Weight kg:350 - 450
  • Diameter range, mm:0,5 – 2,5
Coil Z3

Without packaging. Each coil is tied with a metal steel tape (0.8x30) mm in six places evenly spaced around the coil's circumference. Upon request, each coil is tied with a metal steel tape (0.8x30) mm and packed in a polypropylene fabric, which is fixed with tape. The coil is packaged on a wooden pallet with a metal steel tape (0.8x30) mm. Pallet size (730 x 730) mm. The pallet is lined with wrapping paper.

  • Type of winding:Coil Z3
  • Dimensions, mm, d*D*h:356Х730х600
  • Weight kg:800 - 1000
  • Diameter range, mm:1,0 – 1,4
Bundle

Each bundle is tied: - steel metal tape (0.6x19) mm in at least six places evenly spaced around the circumference of the bundle; -wire rod Ø 5.5 mm or steel metal tape (0.8x30) mm in four places evenly spaced around the circumference of the bundle. Tapes are fixed with heat-treated wire Ø1.8 mm around the bundle. At the request of the consumer, the bundles are additionally equipped with 4 loading rings. It is not lubricated or packaged.

  • Type of winding:Bundle
  • Dimensions, mm, d*D*h:300/500 х 800 х 500
  • Weight kg:500 - 900
  • Diameter range, mm:2,3 – 6,0
Coil «Rosette-type»

Bundles weighing (500 - 800) kg are tied with a steel metal tape (0.8x30) mm. The tapes are fixed with heat-treated wire Ø 2.5 mm. Rings are hung on the rosette. Bundles weighing 250 kg are tied with a packing tape (0.5x16) mm, packaged (3-4 coils each) with a metal steel tape (0.8x30) mm in four places evenly spaced around the circumference of the package. The tapes are fixed with heat-treated wire Ø2.5 mm around the circumference of the bag. The sling rings are hung on the bag. Packaging on demand. The rosette is mounted on a wooden pallet (750x750) mm and packaged to the pallet with a steel metal tape (0.8x30) mm

  • Type of winding:Coil «Rosette-type»
  • Dimensions, mm, d*D*h:420х850х250
  • Weight kg:250
  • Diameter range, mm:1,8 – 4,0
  • Type of winding:Coil «Rosette-type»
  • Dimensions, mm, d*D*h:440х750х500
  • Weight kg:500 - 600
  • Diameter range, mm:1,8 – 4,0
  • Type of winding:Coil «Rosette-type»
  • Dimensions, mm, d*D*h:440х830х800
  • Weight kg:700 -800
  • Diameter range, mm:1,8 – 4,0

Calculator

Choose parameters for calculation: